Dc Motor Pump Group

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

General Description

Consisting of a heavy duty DC motor and the CBK gear pump,this pump–motor group is typically used as a power station of a complex hydraulic system.

Outline Dimension

Dc Motor Pump Group

Hydraulic circuit optional 095

Dc Motor Pump Group

Model Specifications

Dc Motor Pump Group

Special Notes

1.For different fiow rate pump.pressure and motor power,please check the ordering guidance.

2.This motor is based on gap working system S2=2 - 4min(continuous working time). so it cannot run continuously.

3.Before installation,the cylinder.oil pipe,joint and other hydraulic components must be cleaned and free from any impurities.

4.The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities HM46 hydraulic oil is recommended.

5.The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oi every 3,000 hours after that.


Product Category

Product Inquiry

Quick Links

Product Category

Contact Us

  No. 13, Kuangda Road, Panjia, Wujin District, Changzhou City, Jiangsu Province



Copyright  2021 Changzhou Rohn Hydraulic Sci-Tech Co., Ltd.  Sitemap  Support By Leadong
Send Us A Message