Wheelchair Lift Power Unit
Home » Products » Hydraulic Power Unit » Hydraulic Power Unit For Armarium » Wheelchair Lift Power Unit

Wheelchair Lift Power Unit

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

General Description

This power unit is specially designed for wheelchair lifter for disabled vehicles, which can be electrically controlled to rise or manually controlled to rise,the descending is controlled by the uploading solenoid valve. The quantitative pressure compensating throttle valve makes the descending steady.

Outline Dimension

Wheelchair Lift Power Unit

Hydraulic circuit optional 099

Wheelchair Lift Power Unit

Model Specifications

Wheelchair Lift Power Unit

Special Notes

1. For different flow rate pump,pressure and motor power,please check the ordering guidance.

2. This motor is based on gap working system S2-2 ~ 4min(continuous working time),so it cannot run continuously.

3. Before installation,the cylinder,oil pipe,joint and other hydraulic components must be cleaned and free from any impurities.

4. The viscosity of hydraulic oil should be 15-68cst and should be clean and tree of impurities.HiM46 hydraulic oil is recommended.

5. If you need manual oil discharge device for emergency,please specify when ordering.

6. Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

7. The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oil every 3,000 hours after that.


Product Category

Product Inquiry

Quick Links

Product Category

Contact Us

  No. 13, Kuangda Road, Panjia, Wujin District, Changzhou City, Jiangsu Province



Copyright  2021 Changzhou Rohn Hydraulic Sci-Tech Co., Ltd.  Sitemap  Support By Leadong
Send Us A Message