- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
General Description
This power unit is specially designed for simple parking equipment, which provides lifting function, the descending is controlled by adjustable pressure compensating throttle valve,adjusting descending speed and keep descending smoothly.
Outline Dimension
Hydraulic circuit optional 043
Model Specifications
Special Notes
1.For different flow rate pump,pressure and motor power,please check the ordering guidanoe.
2.If you need manual oil discharge device for emergency .please specify when ordering.
3.This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.
4.Before installation,ensure that the hydraulic components such as the oil cylinder,oil pip and joints are clean and free from any impurities.
5. The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HiM46 hydraulic oll is recommended.
6.This hydraulic power unit is suitable for vertical installation.
7.Check that whether there is enough oil in the oil tank immediately after the
first operating of the system.
8.The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oil every 3,000 hours after that.
General Description
This power unit is specially designed for simple parking equipment, which provides lifting function, the descending is controlled by adjustable pressure compensating throttle valve,adjusting descending speed and keep descending smoothly.
Outline Dimension
Hydraulic circuit optional 043
Model Specifications
Special Notes
1.For different flow rate pump,pressure and motor power,please check the ordering guidanoe.
2.If you need manual oil discharge device for emergency .please specify when ordering.
3.This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.
4.Before installation,ensure that the hydraulic components such as the oil cylinder,oil pip and joints are clean and free from any impurities.
5. The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HiM46 hydraulic oll is recommended.
6.This hydraulic power unit is suitable for vertical installation.
7.Check that whether there is enough oil in the oil tank immediately after the
first operating of the system.
8.The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oil every 3,000 hours after that.
