Tyre Changer Power Unit

General Description

This hydraulic power unit is specially designed for tyre changer, which controls several groups of double-acting cylinders to work independently.

Outline Dimension

Hydraulic circuit optional 035

Model Specifications

Special Notes

1.For different flow rate pump.pressure and motor power.please check the ordering guidance.

2.If you need manual oil discharge device for emergency. please specify when ordering.

3.This power unit can not run continuously (1 min ON,9 min OFF).it can work repeatedly.

4.Before installation, ensure that the hydraulic components such as the oil cylinder,oil pipe and joints are clean and free from any impurities.

5.The viscosity of hydraulic oil should be 15-6Bcst and should be clean and free of impurities. HM46 hydraulic oil is recommended.

6.This hydraulic power unit is suitable for horizontal installation.

7.Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

8.The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oil every 3,000 hours after that.