Lift Table Power Units
Home » Products » Hydraulic Power Unit » Hydraulic Power Unit For Logistics Storage » Lift Table Power Units

Lift Table Power Units

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

General Description

This hydraulic power unit is composed of high pressure gear pump,AC motor,multi–purpose integrated block,hydraulic valve,tank and other parts.Providing lifting functions for the lifting platform, the quantitative pressure compensative valve makes the decline steady.

Outline Dimension

Lift Table Power Units

Hydraulic circuit optional 010

Lift Table Power Units

Model Specifications

Lift Table Power Units

Special Notes

1.For different flow rate pump.pressure and motor power,please check the ordering guidance.

2.If you need manual oil discharge device for emergency.please specify when ordering.

3.This power unit can not run continuously(1 min ON,9 min OFF),it can work repeatedly.

4.Before installation, ensure that the hydraullc components such as the oil cylinder,oil pipe and joints are clean and free from any impurities.

5.The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities. HM46 hydraulic oil is recommended.

6.This hydraulic power unit is suitable for Horizontal installation.

7.Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

8.The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oil every 3,000 hours after that.


Product Category

Product Inquiry

Quick Links

Product Category

Contact Us

  No. 13, Kuangda Road, Panjia, Wujin District, Changzhou City, Jiangsu Province


Copyright  2021 Changzhou Rohn Hydraulic Sci-Tech Co., Ltd.  Sitemap  Support By Leadong
Send Us A Message