- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
General Description
This hydraulic power unit adopts zero leakage two–way check valve to realize the complete isolation of two oil circuits, so that the rising and falling actions of the two oil circuits do not interfere with each other, it is an ideal hydraulic source for the single lifting system of multiple cylinders.It is widely used for scissors lift.
Outline Dimension
Hydraulic circuit optional 029
Model Specifications
Special Notes
1.For different flow rate pump. pressure and motor power, please check the ordering guidance.
2.If you need manual oil discharge device for emergency,please specify when ordering.
3.This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.
4.Before installation, ensure that the hydraulic components such as the oil cylinder,oil pipe and joints are clean and free from any impurities.
5.The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.
6.This hydraulic power unit is suitable for vertical installation.
7.Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
8.The hydraulic oil should be replaced after the first 100 hours'use ofl the system, and change the oil every 3,000 hours after that.
General Description
This hydraulic power unit adopts zero leakage two–way check valve to realize the complete isolation of two oil circuits, so that the rising and falling actions of the two oil circuits do not interfere with each other, it is an ideal hydraulic source for the single lifting system of multiple cylinders.It is widely used for scissors lift.
Outline Dimension
Hydraulic circuit optional 029
Model Specifications
Special Notes
1.For different flow rate pump. pressure and motor power, please check the ordering guidance.
2.If you need manual oil discharge device for emergency,please specify when ordering.
3.This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.
4.Before installation, ensure that the hydraulic components such as the oil cylinder,oil pipe and joints are clean and free from any impurities.
5.The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.
6.This hydraulic power unit is suitable for vertical installation.
7.Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
8.The hydraulic oil should be replaced after the first 100 hours'use ofl the system, and change the oil every 3,000 hours after that.
