Hydraulic Power Pack For Car Carrier
Home » Products » Hydraulic Power Unit » Hydraulic Power Unit For Truck » Hydraulic Power Pack For Car Carrier

Hydraulic Power Pack For Car Carrier

Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

General Description

This power unit is specially designed for car carrier, it controls multiple double acting oil cylinders working separately.By direction changing of the solenoid valve to achieve the function of the car multi-storey parking space lifting.


Outline Dimension

Hydraulic Power Pack For Car Carrier


Hydraulic circuit optional 103

Hydraulic Power Pack For Car Carrier


Model Specifications

Hydraulic Power Pack For Car Carrier


Special Notes

1. For different fiow rate pump.pressure and motor power,please chect the he ordering guidance.

2. This motor is based on gap working system S2=2 - 4min(continuous working time),so it cannot run continuously.

3. Before installation,the cylinder,oil pipe,joint and other hydraulic components must be cleaned and free from any impurities.

4. The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HiM46 hydraulic oil is recommended.

5. It you need manual oil discharge device for emergency.please specity when ordering.

6. Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

7. The hydraulic oil should be replaced after the first 100 hours' use of the system, and change the oil every 3,000 hours after that.


Previous: 
Next: 

Product Category

Product Inquiry

Quick Links

Product Category

Contact Us

  No. 13, Kuangda Road, Panjia, Wujin District, Changzhou City, Jiangsu Province

  +86-13806122516

  sw@enronghy.com

Copyright  2021 Changzhou Rohn Hydraulic Sci-Tech Co., Ltd.  Sitemap  Support By Leadong
Send Us A Message