Power Units For Wing Van
Home » Products » Hydraulic Power Unit » Hydraulic Power Unit For Truck » Power Units For Wing Van

Power Units For Wing Van

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

General Description

This hydraulic power unit is usod for the wingspan van control system, which has two kinds: single wing plate opening and double wing plate opening.It adopts the electromagnetic directional valve to realize the opening and closing of the wing plate.The cloning speed of the wing plate is adjusted by the throttle valve,with reliable pertormance and stabie qualty.

Outline Dimension

Power Units For Wing Van

Hydraulic circuit optional 046

Power Units For Wing Van

Model Specifications

Power Units For Wing Van

Special Notes

1. For different fiow rate pump,pressure and motor power,please check the ordering guidance.

2. This motor is based on gap working system S2=2 - 4min(continuous working time),so it cannot run continuously.

3. Before installation,the cylinder,oil pipe,joint and other hydraulic components must be cleaned and free from any impurities.

4. The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic ol is recommended.

5. If you need manual oil discharge device for emergency,please specify when ordering.

6. Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

7. The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oil every 3,000 hours after that.


Product Category

Product Inquiry

Quick Links

Product Category

Contact Us

  No. 13, Kuangda Road, Panjia, Wujin District, Changzhou City, Jiangsu Province



Copyright  2021 Changzhou Rohn Hydraulic Sci-Tech Co., Ltd.  Sitemap  Support By Leadong
Send Us A Message