Snow Remover Power Unit
Home » Products » Hydraulic Power Unit » Hydraulic Power Unit For Truck » Snow Remover Power Unit

Snow Remover Power Unit

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

General Description

This power unit is specially designed for all kinds of trucks to add different types of skis,providing skis with lifting and left-right swing functions.Different loops and different valves are optional.

Outline Dimension

Snow Remover Power Unit

Hydraulic circuit optional 060

Snow Remover Power Unit

Model Specifications

Snow Remover Power Unit

Special Notes

1. For different fiow rate pump. pressure and motor power. please check the ordering guidanoe.

2. This motor is based on gap working system S2=2 - 4min(continuous working time), so it cannot run continuously.

3. Before installation, the cylinder, oil pipe, joint and other hydraulic components must be cleaned and free from any impurities.

4. The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraufic oil is recommended.

5. Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

6. The hydraulic oil should be replaced after the first 100 hours' use of the system, and change the oil every 3,000 hours after that.


Product Category

Product Inquiry

Quick Links

Product Category

Contact Us

  No. 13, Kuangda Road, Panjia, Wujin District, Changzhou City, Jiangsu Province


Copyright  2021 Changzhou Rohn Hydraulic Sci-Tech Co., Ltd.  Sitemap  Support By Leadong
Send Us A Message